PPWR explained: what the EU packaging regulation means for your business

Do you use packaging for your products or for shipping? Then the PPWR applies to you. The first obligations under this EU regulation have applied since 12 August 2026, and it will become stricter step by step until 2040. This article explains what already applies, which deadlines are coming, which documents you need for the declaration of conformity and what manufacturers of home textiles and bedding should look out for.

Contents

The PPWR in brief

  • What: the Packaging and Packaging Waste Regulation, officially Regulation (EU) 2025/40.
  • Since when: in force since 11 February 2025, applicable since 12 August 2026.
  • What already applies: a declaration of conformity with technical documentation, identification of the packaging, manufacturer details, limit values for hazardous substances and registration for producer responsibility.
  • Next deadlines: 12 August 2028 (harmonised EU label), 1 January 2030 (recyclability, recycled content, no more than 50 per cent empty space, minimisation), 1 January 2038 (class B as a minimum).
  • Key message: less material, better recyclability, more recycled content – and all of it backed up by documents.

What is the PPWR?

The PPWR is the European regulation on packaging. It sets out how recyclable packaging must be, what it is made of, how much material it uses and how it is labelled. Its official name is Regulation (EU) 2025/40. The full text and a summary are available on EUR-Lex, the official database of EU law.

Important: the PPWR is a regulation, not a directive. It applies directly in all member states, without being transposed into national law. The substantive rules are therefore the same throughout the EU – a simplification for companies that supply several countries.

The targets are measurable: packaging waste per inhabitant must fall by 5 per cent by 2030 compared with 2018, by 10 per cent by 2035 and by 15 per cent by 2040.

Why was this regulation introduced?

The amount of waste is growing and recycling is not keeping up. In 2023, the EU generated 79.8 million tonnes of packaging waste, around 178 kilos per inhabitant (Eurostat). Less than half of plastic packaging is recycled. The old Packaging Directive of 1994 left each country a lot of room for manoeuvre; the PPWR replaces it with a single set of rules, in all member states, on the same date.

Which obligations have applied since 12 August 2026?

  • Declaration of conformity and technical documentation: for every packaging placed on the market, it must be possible to show that it meets the requirements. Market surveillance authorities can request the documents.
  • Identification: the packaging bears a type, batch or serial number.
  • Manufacturer details: the name and contact details of the manufacturer are on the packaging or can be accessed via a QR code.
  • Hazardous substances: lead, cadmium, mercury and hexavalent chromium together no more than 100 mg/kg; for packaging that comes into contact with food, limit values for PFAS also apply.
  • Producer responsibility: registration in each member state where you place packaging on the market (see ‘If you sell in the EU’ below).
  • No deceptive packaging: double walls, false bottoms and unnecessary layers that only make packaging look bigger are not allowed.

PPWR declaration of conformity: the documents you need

With the EU declaration of conformity, the manufacturer confirms that a packaging meets the requirements of the PPWR. The declaration is based on technical documentation. Under the PPWR, the manufacturer is whoever makes a packaging, or has it designed or made and markets it under their own name or brand. If you have packaging made with your logo, this role may therefore lie with you. It is best to have a lawyer check which role applies in your situation.

What the documents contain

Document

Contents

Declaration of conformity

Identification of the packaging (type, batch or serial number), name and address of the manufacturer, the requirements met and standards applied, place, date and signature.

Technical documentation

Description of the packaging and its components, material composition, evidence on hazardous substances, recyclability and minimisation, and test reports.

Information from your packaging supplier

Material declaration, exact composition per component, technical data sheets and information from the material producers.

This is where most companies get stuck: not at the design stage, but when it comes to proof. Your documentation is only as good as your supplier’s data. Request a material declaration and data sheets at an early stage, including for zips, handles, windows and labels. Model documents and guidance are available from, among others, chambers of commerce and industry associations.

PPWR deadlines: the timeline up to 2040

The main deadlines

Date

What applies

12 August 2026

The PPWR applies: declaration of conformity, technical documentation, identification, manufacturer details, limit values for hazardous substances.

12 August 2028

Harmonised EU label on the material composition of the packaging (or 24 months after the implementing act, if that is later).

1 January 2030

Only recyclable packaging in classes A, B or C (at least 70 per cent recyclable); weight and volume limited to what is necessary; no more than 50% empty space in grouped, transport and e-commerce packaging, with filling material counting as empty space; minimum recycled content in plastic packaging, 35% for most packaging that does not come into contact with food.

2035

Packaging must also be recyclable at scale in practice.

1 January 2038

Only class A or B; class C is no longer permitted.

2040

Higher recycled content, 65% for most plastic packaging that does not come into contact with food; 15% less packaging waste than in 2018.

For recyclability, recycled content and empty space, 2030 is the earliest date: if the EU implementing acts come later, the deadline moves accordingly.

August 2026 was the starting point, not the finish line. If you choose the right material and construction now, you will not have to redesign your packaging before 2030 and again before 2038.

PPWR for home textiles and bedding: what counts for each packaging

Duvets, pillows and mattresses are bulky and soft. Their packaging therefore often has handles, hooks, zips, windows, large labels and a lot of printing. It is precisely these components that make the PPWR relevant to the sector: the regulation assesses not just the film, but the packaging as a whole.

What matters for each packaging

Packaging

What to look for

Duvet bag for retail (duvet packaging)

One dominant material, as few components in other materials as possible, space for the EU label from 2028. Two or three standard bag families instead of a separate construction for every item.

Transparent pillow bag (pillow packaging)

Thin material, presentation matters. A good place to introduce recycled content step by step: start with items where transparency is less critical.

Bag with zip or handle

Zip and handle preferably in the same material; additional information on components via a QR code, but never instead of the mandatory label.

Shipping box for bedding (retail and e-commerce packaging)

The empty-space rule from 2030 is based on volume. Fewer box sizes, made to fit rather than filled up.

Mattress packaging (mattress packaging)

Large quantities of film: decide early on material thickness and recycled content.

Recycled content: 2030 seems far away, but the decisions are made now

From 2030, most plastic packaging that does not come into contact with food must contain 35 per cent post-consumer recycled content, rising to 65 per cent from 2040. It is calculated as an average per manufacturing plant and per year. Recycled content can affect appearance, transparency and processing. Start with test runs and agree acceptance criteria with your customers, rather than having to switch under time pressure in 2029.

Mono-material: where it goes wrong in practice

A bag made of one material but with a zip in another material, a glued-in window or a label in a third material is not mono-material packaging in practice. So check handles, closures, windows, labels, printing and adhesives too. Read more in our article on mono-material packaging.

The EU label: reserve space in your design now

From 12 August 2028, every packaging will carry a harmonised EU label with pictograms on its material composition; additional information may be provided via a QR code. The European Commission will set out the exact design in an implementing act. Reserve a fixed area in your artwork now that stays visible when the packaging hangs on the shelf, and build your print files in a modular way. The changeover will then be an adjustment, not a new design for every item.

If you sell in the EU: producer responsibility per member state

The PPWR applies directly in all EU member states, and its product requirements are the same everywhere. Producer responsibility, however, is still registered per member state: you register in each country where you place packaged products on the market. Three examples:

  • Germany: registration in the LUCID packaging register, under the VerpackDG that replaced the Verpackungsgesetz on 12 August 2026.
  • France: membership of an approved éco-organisme and a unique identification number (IDU).
  • The Netherlands: producer responsibility for packaging runs via Verpact.

In short: the same product rules everywhere, but a separate registration in each country. The United Kingdom is not part of the EU, so the PPWR does not apply there.

Which companies does the PPWR apply to?

To the whole chain: manufacturers, importers, distributors, online shops and logistics service providers. Which obligation lies with you depends on your role. Manufacturers and suppliers of duvets, pillows, mattresses, toppers and other home textiles should take a close look: this category often involves a lot of material, a lot of volume and material combinations that make recycling harder. Retailers and buyers also increasingly ask for material information themselves.

Does my current packaging comply with the PPWR?

That depends on the type of packaging, the material, the application and your role. Start with an inventory and go through these questions for each packaging:

  • Which materials and components is the packaging made of?
  • Can we reduce the number of materials or switch to mono-material?
  • Is the packaging larger or heavier than necessary?
  • Can we use recycled content?
  • Does the packaging keep a function for the customer, for example as a storage bag?
  • Does our supplier provide material declarations and data sheets?
  • Is there space in the artwork for the EU label from 2028?

What changes can be made to existing packaging?

In most cases, packaging does not need to be replaced completely. Targeted changes are often enough: a more recyclable material, fewer types of material, a format that fits the product, thinner material or recycled content. The packaging must still protect the product, be easy to handle and look good, though. Less material that leads to more transport damage is no gain overall.

Reuse: packaging that keeps a function after purchase

Besides recycling, the PPWR also promotes reuse. For home textiles, this is an obvious step: a sturdy, breathable bag in which a duvet or pillow is delivered can serve as a storage bag for years. Whether such a bag legally counts as packaging, as reusable packaging or as a product in its own right has to be assessed for each application; the words “storage bag” on it do not decide this on their own. Which materials are suitable? See our overview of packaging materials for home textiles.

How Willems Packaging can help

Since 1987, Willems Packaging has developed packaging for businesses, specialising in duvets, pillows, mattresses and other home textiles. We review the material, components and format with you, suggest mono-material alternatives and produce custom-made packaging with partners in Europe and South-East Asia, from 500 pieces.

Send us a sample, a photo or the specification of your current packaging. Together, we look at the material, recyclability, mono-material options, dimensions and documents.

Quick answers to frequently asked questions

PPWR stands for Packaging and Packaging Waste Regulation, the EU regulation on packaging and packaging waste. Its official name is Regulation (EU) 2025/40; it is also referred to as the EU Packaging Regulation.

A declaration by the manufacturer that a packaging meets the requirements of the PPWR, based on technical documentation. Since 12 August 2026, it has been required for packaging placed on the market. It includes, among other things, the identification of the packaging, the manufacturer’s details and the requirements met.

The manufacturer as defined in the PPWR: whoever makes the packaging, or has it designed or made and markets it under their own name or brand. For printed custom packaging, this can be the brand owner. The brand owner depends on the material information from their supplier.

The first obligations have applied since 12 August 2026. Further deadlines: the harmonised EU label in 2028; recyclability, recycled content, minimisation and empty space in 2030; class B as a minimum in 2038.

Each country had to transpose the 1994 directive into its own law, with its own room for manoeuvre. The PPWR is a regulation and applies directly in all member states: the same rules everywhere, on the same date.

Yes. It applies to the whole chain, from manufacturer to online shop. There are exemptions for micro-enterprises on certain points, but most small and medium-sized companies have to meet the requirements.

The components count: zips, handles, windows and labels help determine recyclability. From 2028, the artwork needs space for the EU label; from 2030, plastic bags need a minimum share of recycled content and shipping boxes may contain no more than 50 per cent empty space.

Packaging made of one type of material, with recycled content and with a format that fits the product. The easier a packaging is to sort and recycle, the better it scores in the recyclability classes from 2030.

Usually not. Targeted changes to the material, material thickness, components or format are often enough, without reducing the protection of your product.